Shade structure parts list: 20×20 to 40×40
Exact parts for five common EMT and Maker Pipe shade sizes, straight from the CampShade planner: poles, connectors, anchors, straps, tarps and bungees, with total weight and build time.
Every list assumes a frame 10 ft tall on playa or hard-packed dirt, with no wind walls and tarps fitted largest first. What changes for grass, pavement, walls and lower sections is below the lists.
| Size | EMT sticks | Fittings | Straps | Tarps | Weight |
|---|---|---|---|---|---|
| 20×20 ft | 21 | 18 | 4 | 1 × 20×20 | 177 lb |
| 30×20 ft | 29 | 24 | 6 | 1 × 20×20, 1 × 10×20 | 248 lb |
| 30×30 ft | 40 | 32 | 8 | 1 × 20×20, 2 × 10×20, 1 × 10×10 | 344 lb |
| 40×30 ft | 51 | 40 | 8 | 2 × 20×20, 2 × 10×20 | 435 lb |
| 40×40 ft | 65 | 50 | 8 | 4 × 20×20 | 550 lb |
Fittings are the Maker Pipe connectors plus a base flange per pole. Each strap gets its own anchor. Weights use 6.7 lb per 10 ft stick of 1" EMT; row weights are rounded, so they can miss the total by a pound or two.
20×20 ft
- Tarp, by size
- 90° corner
- 4-way (edge)
- 5-way (inside)
- Ratchet strap to its anchor
| Qty | Part | Weight |
|---|---|---|
| 21 | 1" × 10' EMT Conduit | 141 lb |
| 4 | Maker Pipe 90° Corner Connector — 1" | 2 lb |
| 4 | Maker Pipe 4-Way Connector — 1" | 3 lb |
| 1 | Maker Pipe 5-Way Connector — 1" | 1 lb |
| 9 | Maker Pipe Flange Connector — 1" | 5 lb |
| 31 | 8" Galvanized Spike Nails | 5 lb |
| 4 | 1/2" × 18" Hex Lag Bolt + Washer | 2 lb |
| 4 | 1" × 15' Ratchet Tie-Down (500 lb WLL)At the corners and every 20 ft. Burning Man’s tips say to bolt every outside pole: 8 straps and 8 anchors. | 5 lb |
| 1 | 20' × 20' Aluminum/Reflective Tarp | 14 lb |
| 1 | Ball Bungee Cords — 6" (50-pack)36 bungees needed · 50 in 1 pack (14 spare). | 1 lb |
| Total | 177 lb |
400 sq ft of shadeBuild time about 4 hours4 straps (8 at every outside pole)
30×20 ft
- Tarp, by size
- 90° corner
- 4-way (edge)
- 5-way (inside)
- Ratchet strap to its anchor
| Qty | Part | Weight |
|---|---|---|
| 29 | 1" × 10' EMT Conduit | 194 lb |
| 4 | Maker Pipe 90° Corner Connector — 1" | 2 lb |
| 6 | Maker Pipe 4-Way Connector — 1" | 4 lb |
| 2 | Maker Pipe 5-Way Connector — 1" | 2 lb |
| 12 | Maker Pipe Flange Connector — 1" | 6 lb |
| 40 | 8" Galvanized Spike Nails | 6 lb |
| 6 | 1/2" × 18" Hex Lag Bolt + Washer | 3 lb |
| 6 | 1" × 15' Ratchet Tie-Down (500 lb WLL)At the corners and every 20 ft. Burning Man’s tips say to bolt every outside pole: 10 straps and 10 anchors. | 7 lb |
| 1 | 10' × 20' Reflective Shade Tarp | 8 lb |
| 1 | 20' × 20' Aluminum/Reflective Tarp | 14 lb |
| 2 | Ball Bungee Cords — 6" (50-pack)58 bungees needed · 100 in 2 packs (42 spare). | 1 lb |
| Total | 248 lb |
600 sq ft of shadeBuild time about 5 hours6 straps (10 at every outside pole)
30×30 ft
- Tarp, by size
- 90° corner
- 4-way (edge)
- 5-way (inside)
- Ratchet strap to its anchor
| Qty | Part | Weight |
|---|---|---|
| 40 | 1" × 10' EMT Conduit | 268 lb |
| 4 | Maker Pipe 90° Corner Connector — 1" | 2 lb |
| 8 | Maker Pipe 4-Way Connector — 1" | 6 lb |
| 4 | Maker Pipe 5-Way Connector — 1" | 3 lb |
| 16 | Maker Pipe Flange Connector — 1" | 8 lb |
| 52 | 8" Galvanized Spike Nails | 8 lb |
| 8 | 1/2" × 18" Hex Lag Bolt + Washer | 4 lb |
| 8 | 1" × 15' Ratchet Tie-Down (500 lb WLL)At the corners and every 20 ft. Burning Man’s tips say to bolt every outside pole: 12 straps and 12 anchors. | 10 lb |
| 1 | 10' × 10' Reflective Shade Tarp | 4 lb |
| 2 | 10' × 20' Reflective Shade Tarp | 16 lb |
| 1 | 20' × 20' Aluminum/Reflective Tarp | 14 lb |
| 2 | Ball Bungee Cords — 6" (50-pack)94 bungees needed · 100 in 2 packs (6 spare). | 1 lb |
| Total | 344 lb |
900 sq ft of shadeBuild time about 6 hours8 straps (12 at every outside pole)
40×30 ft
- Tarp, by size
- 90° corner
- 4-way (edge)
- 5-way (inside)
- Ratchet strap to its anchor
| Qty | Part | Weight |
|---|---|---|
| 51 | 1" × 10' EMT Conduit | 342 lb |
| 4 | Maker Pipe 90° Corner Connector — 1" | 2 lb |
| 10 | Maker Pipe 4-Way Connector — 1" | 7 lb |
| 6 | Maker Pipe 5-Way Connector — 1" | 5 lb |
| 20 | Maker Pipe Flange Connector — 1" | 10 lb |
| 64 | 8" Galvanized Spike Nails | 10 lb |
| 8 | 1/2" × 18" Hex Lag Bolt + Washer | 4 lb |
| 8 | 1" × 15' Ratchet Tie-Down (500 lb WLL)At the corners and every 20 ft. Burning Man’s tips say to bolt every outside pole: 14 straps and 14 anchors. | 10 lb |
| 2 | 10' × 20' Reflective Shade Tarp | 16 lb |
| 2 | 20' × 20' Aluminum/Reflective Tarp | 28 lb |
| 3 | Ball Bungee Cords — 6" (50-pack)116 bungees needed · 150 in 3 packs (34 spare). | 2 lb |
| Total | 435 lb |
1,200 sq ft of shadeBuild time about 8 hours8 straps (14 at every outside pole)
40×40 ft
- Tarp, by size
- 90° corner
- 4-way (edge)
- 5-way (inside)
- Ratchet strap to its anchor
| Qty | Part | Weight |
|---|---|---|
| 65 | 1" × 10' EMT Conduit | 436 lb |
| 4 | Maker Pipe 90° Corner Connector — 1" | 2 lb |
| 12 | Maker Pipe 4-Way Connector — 1" | 8 lb |
| 9 | Maker Pipe 5-Way Connector — 1" | 8 lb |
| 25 | Maker Pipe Flange Connector — 1" | 13 lb |
| 79 | 8" Galvanized Spike Nails | 12 lb |
| 8 | 1/2" × 18" Hex Lag Bolt + Washer | 4 lb |
| 8 | 1" × 15' Ratchet Tie-Down (500 lb WLL)At the corners and every 20 ft. Burning Man’s tips say to bolt every outside pole: 16 straps and 16 anchors. | 10 lb |
| 4 | 20' × 20' Aluminum/Reflective Tarp | 56 lb |
| 3 | Ball Bungee Cords — 6" (50-pack)144 bungees needed · 150 in 3 packs (6 spare). | 2 lb |
| Total | 550 lb |
1,600 sq ft of shadeBuild time about 10 hours8 straps (16 at every outside pole)
What changes
- Grass or soft soil. Swap each lag bolt for a 15" auger anchor, one for one. A 30×30 in grass takes 8 augers and the same 8 straps.
- Pavement. No nails and no bolts. Each strap anchor becomes two 50 lb sandbags and each flange plate gets one: 32 for a 30×30. They ship empty; fill them on site.
- Wind walls. Each 10 ft bay of wall adds one 8 × 10 ft wall panel and 10 bungees, and every pole along the wall gets its own strap and anchor: a straight wall of n bays adds n + 1. One 30 ft wall on a 30×30 adds 3 panels and 4 straps and anchors. Why walls get extra straps.
- 8 ft sections. Some sticks are cut to 8 ft. Squares that share a tarp need the same height, so a mixed layout usually takes more, smaller tarps, and poles where the heights meet can need a second connector the list doesn’t count.
Packing notes
- Length is the hard part. A 10 ft stick needs a roof rack, a long pickup bed or a trailer, whatever the weight.
- Buy EMT near the event if you can. It’s sold at most hardware stores, and freight on long steel adds up.
- Bungees come in 50-packs. The planner rounds up and shows the spares; keep them, since a few always snap.